Mazda 6 automaatkast

Mazda 6 automaatkast

PostitusPostitas MR22 » 18 Veebr 2013, 21:35

Tere, jutt on järgmine - automaatkastil diagnoos "Shift Solenoid C Performance/Stuck Off". Tahaks kasti korda teha, aga oskab keegi öelda, kas Shift Solenoid C on eraldi vahetatav osa või läheb terve solenoidide plokk vahetusse? Igasugune info on teretulnud :wave:
Auto andmed: Mazda 6 Wagon, 2,0 l, 105 kW, bensiin, 2007 a.
MR22
 
Postitusi: 1
Liitunud: 18 Veebr 2013, 21:24
Asukoht: Tallinn

Re: Mazda 6 automaatkast

PostitusPostitas Mario » 18 Veebr 2013, 21:43

Possible causes of OBD code P0761:
- Low transmission fluid level - Dirty transmission fluid - Faulty shift solenoid C valve - Shift solenoid C valve harness or connectors - Shift solenoid C valve circuit is open or shorted The Error code is generally activated on detection of the following conditions: The P0761 code is detected when the ECM has detected a mechanical fault with the solenoid energized, valve stuck off

aga üldiselt on need solenoidid kõik ikkagi eraldi asukohtades, aga noh, lammutamistöö on ikka üks.. esialgu võiks alustada odavamast - kontrollida taset, seega võiks ikkagi viia pädevasse töökotta.
If you can't fix it with a hammer... Then you've got an electrical problem!!
Kasutaja avatar
Mario
 
Postitusi: 6051
Liitunud: 29 Mär 2006, 17:37
Asukoht: Tartu-Jõgeva /55 608 255


Mine Mazda 6

Kes on foorumil

Kasutajad foorumit lugemas: Registreeritud kasutajaid pole ja 1 külaline